Rotary Screw Air Compressor with Dryer 10HP 3 Phase 230/460 V + 60-Gal ASME Tank

Rotary Screw Air Compressor with Dryer 10HP 3 Phase 230/460 V with 60-Gallon ASME Tank. Power : 10HP / 7.5KW; Input Voltage: 230V/460V 60Hz/ 3 phase; Air Flow : 39cfm; Max Working Pressure : 125-150 psi / 8-10 bar; Motor : 6300rpm Output Pipe Diameter: NPT1" Package: 773661" Weight: 900lbs Tank: ASME 80 gal.

Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep Garage & Industrial. Every 50 hours or weekly --- Check oil level. -- Check intake filter, if necessary clean it.

-- Drain condensation water from oil tank. Every 500 hours --- Check and adjust belt tension if necessary (belt driven only) Every 2000 hours --- Replace lubricants (for mineral lubricants oil) --- Replace oil filter. -- Replace intake filter Every 4000 hours --- Replace lubricants (for synthetic lubricants oil) --- Replace oil separator --- Clean cooler for dirt. Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.

The service life of compressor depends on the environment conditions such as dust, vent etc. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Rotary Screw Air Compressors". The seller is "kunding02" and is located in this country: US. This item can be shipped to United States.

Brand: HPDMC
Rated Horsepower: 10 hp (7.5 kW)
Current Phase: 3 Phase
Airflow Volume (CFM): 39-35
Air Tank Capacity: 60 gal
Maximum Pressure: 125 psi
Rated Voltage: 230 V / 460 V