460 V 3 Phase 20 HP Rotary Screw Air Compressor with Air Dryer and 80 Gal Tank. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep Garage & Industrial & Light Duty Features a programmable control system Reduces your air system footprint and allows for easy maintenance. Prepare to be amazed at the low decibel level of the QRS (Quiet Rotary Screw) 20HP air compressor from HPDAVV. This engineering marvel is quiet, powerful, reliable and made to be operating all day, every day, providing your shop with a consistent supply of compressed air when you need it.
With its 20hp motor and 80-gallon receiver tank, the HPDAVV is set to provide un-equaled pressure and consistency unlike any other compressor line on the market. Less maintenance than a piston-based air compressor and equipped with a tank-mounted air dryer to provide moisture-free air flow, the HPDAVV should be a staple of any shop looking to increase production by getting customers in and out quickly and efficiently.
Easy to use, efficient, and reliable, the HPDAVV range meets the compressed air demands of tire shops, paint shops, car dealers, maintenance shops and more. The range is quiet by design, allowing it to be installed almost anywhere in the workshop, without disturbing your working environment. Base mounted or tank mounted, with or without dryer, and with 125-150 psig pressure variants available, the Quiet Rotary Screw is a complete solution for your business.
Caution: Please read the operate manual carefully before start the compressor working. Don't dismantle any connector or equipment when machine is running. Otherwise, the high-pressure gas and high temperature will hurt you seriously. Please pay more attention to parts such as pump, oil tank and pipelines, because they are high temperature when machine is running.
Don't try to change the working pressure rated. Because change working pressure exceeding the rated range will cause machines to overload and stop to work. Provide proper grounding connection for electric parts according to electric security regulations.
Use suitable wires matching the working power, otherwise they will burnt out due to high temperature or some other dangerous events occur. The compressed air for breathe use is prohibit. Every 50 hours or weekly --- Check oil level.
-- Check intake filter, if necessary clean it. -- Drain condensation water from oil tank.
Every 500 hours --- Check and adjust belt tension if necessary (belt driven only) Every 2000 hours --- Replace lubricants (for mineral lubricants oil) --- Replace oil filter. -- Replace intake filter Every 4000 hours --- Replace lubricants (for synthetic lubricants oil) --- Replace oil separator --- Clean cooler for dirt. Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.The service life of compressor depends on the environment conditions such as dust, vent etc.