230V 50HP Rotary Screw Air Compressor 3PH 219cfm 150psi Air Compressed System

  

PACK4-TU (with ASME 60 Gal tank). PACK5-230V (with ASME 60 Gal tank).

PACK7-T (with 40 gal tank). 230V 50 HP Rotary Screw Air Compressor 3 Phase Gear Driven Fixed Speed 198 CFM 125PSI 219-198 CFM Industrial. Power : 50HP / 37KW ; Voltage : Input Voltage (V / Hz) : 230V / 60Hz ; Electrical (Phase) : 3ph ; Air Flow : 219-198 cfm ; Output Pipe Diameter : NPT 1 1/2 ; Max Working Pressure : 125-150 psi / 8-10 bar; Full Load Amps : 116. Air Cooling Belt Driven / Direct Driven Stationary Screw Air Compressor, Built-in Air Oil Separator, Motor RPM : 3600;All the compressors we produced are qualified for CE certificated. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep. Features a programmable control system Reduces your air system footprint and allows for easy maintenance We are more than a factory but a trustworthy air compressor solution provider. Please read the operate manual carefully before start the compressor working. Don't dismantle any connector or equipment when machine is running. Otherwise, the high-pressure gas and high temperature will hurt you seriously.

Please pay more attention to parts such as pump, oil tank and pipelines, because they are high temperature when machine is running. Don't try to change the working pressure rated. Because change working pressure exceeding the rated range will cause machines to overload and stop to work. Provide proper grounding connection for electric parts according to electric security regulations. Use suitable wires matching the working power, otherwise they will burnt out due to high temperature or some other dangerous events occur.

The compressed air for breathe use is prohibit. Every 50 hours or weekly --- Check oil level. -- Check intake filter, if necessary clean it. -- Drain condensation water from oil tank.

Every 500 hours --- Check and adjust belt tension if necessary (belt driven only). Every 2000 hours --- Replace lubricants (for mineral lubricants oil) --- Replace oil filter. Every 4000 hours --- Replace lubricants (for synthetic lubricants oil) --- Replace oil separator --- Clean cooler for dirt. Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.

The service life of compressor depends on the environment conditions such as dust, vent etc. For routine maintenance note that HPDMC technical service team are able to provide you with assistance and spare parts. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Rotary Screw Air Compressors". The seller is "hpdavv-1compressor" and is located in this country: US. This item can be shipped to United States.

1. Rated Voltage: 230 V
2. Rated Horsepower: 50 hp (37 kW)
3. Airflow Volume (CFM): 219-198
4. Country/Region of Manufacture: China
5. Color: Blue
6. UPC: 759747661424
7. MPN: does not reply
8. Current Phase: 3 Phase
9. Maximum Pressure: 125-150 psi
10. Brand: HPDAVV